Load Center
Schneider Easy9 Resbo Distribution Board
Specifications
Type
Flush
Current Rating
60A, 100A. 150A
Phases
3
Ways
Upto 42
Standard
IEC 61439-3
Finishing Material
Electrogalvanised Steel with Powder Coating (RAL 9003)
Details
Specification:
- Electrical low voltage cables complying with IEC 60502-1 BS 5467
- Our products tested at internationally reputable labs, KEMA.
- All cable are Flame Retardant to IEC 60332-1 Vertical Flame Propagation Test.
Conductor:
- High conductivity soft annealed copper according to BS EN 60228, Class 1, Class 2 stranded and Class 5 flexible conductor and Stranded aluminum conductor Class2.
- Conductor can be offered with round, round compacted and sectored shape.
Insulation:
- Polyvinyl chloride (PVC) & Cross-linked polyethylene (XLPE) with Maximum service temperature 90ºC.
Armoring (upon request):
- Aluminum Wire Armored “AWA” or Aluminum Tape Armored ATA for single core cable.
- galvanized steel wire “SWA” or galvanized double steel tape “STA”for multi core cable.
Outer Sheathing:
- Polyvinyl Chloride (PVC ST2)
Special Requirements (upon request):
- High fire performance, Flame propagation tests: IEC 60332-3
- Sunlight & UV Resistant
- Water resistance
- Anti-termite resistant
- Lead sheath
- Shield type
- Special color for insulation and outer sheath
- Special outer sheath material: PVC(FRLS), LLDPE, LDPE,MDPE and HDPE
- Different packing options are available
Schneider Acti9 Disbo Distribution Board
Specifications
Type
Flush
Current Rating
63A, 100A, 160A, 200A, 250A
Phases
3
Rated Voltage
220/240 VAC
Ways
Upto 54
Standard
IEC 61439-4
Finishing Material
Electrogalvanised Steel with Powder Coating (RAL 9003)
Details
Specification:
- Electrical low voltage cables complying with IEC 60502-1 BS 5467
- Our products tested at internationally reputable labs, KEMA.
- All cable are Flame Retardant to IEC 60332-1 Vertical Flame Propagation Test.
Conductor:
- High conductivity soft annealed copper according to BS EN 60228, Class 1, Class 2 stranded and Class 5 flexible conductor and Stranded aluminum conductor Class2.
- Conductor can be offered with round, round compacted and sectored shape.
Insulation:
- Polyvinyl chloride (PVC) & Cross-linked polyethylene (XLPE) with Maximum service temperature 90ºC.
Armoring (upon request):
- Aluminum Wire Armored “AWA” or Aluminum Tape Armored ATA for single core cable.
- galvanized steel wire “SWA” or galvanized double steel tape “STA”for multi core cable.
Outer Sheathing:
- Polyvinyl Chloride (PVC ST2)
Special Requirements (upon request):
- High fire performance, Flame propagation tests: IEC 60332-3
- Sunlight & UV Resistant
- Water resistance
- Anti-termite resistant
- Lead sheath
- Shield type
- Special color for insulation and outer sheath
- Special outer sheath material: PVC(FRLS), LLDPE, LDPE,MDPE and HDPE
- Different packing options are available